Difference between revisions of "Update4"

From RSNAV
Jump to: navigation, search
 
(One intermediate revision by one other user not shown)
Line 3: Line 3:
  
 
Note:  
 
Note:  
1. Please use 64GB or less for USB disk.
 
  
2. For Method 2, please pay attention to the USB disk plug-in duration
+
A. Please use 64GB or less for USB disk.
 +
 
 +
B. For Method 2, please pay attention to the USB disk plug-in duration
  
 
Upgrade method one
 
Upgrade method one
Line 33: Line 34:
  
  
[https://drive.google.com/drive/u/0/folders/1iC9h2_7xzdydmIFNXGqBAtjZMmveGaID Go to the Repository]
+
[https://drive.google.com/drive/u/0/folders/1RPpWnWOFT6RPH5nFerEEGgPexjy31fGr Go to the Repository]

Latest revision as of 17:58, 18 September 2019

Product model: U2W-01 Software upgrade instructions

Note:

A. Please use 64GB or less for USB disk.

B. For Method 2, please pay attention to the USB disk plug-in duration

Upgrade method one

1. Format the USB disk to FAT32 format

2. Place the AutoBox_Update.img file in the root directory of the USB flash drive.

3. Insert the product into the car's USB interface port(CarPlay Port), insert the USB disk after the standby screen shows(in Chinese).

4. The upgrade process, upgrading -> upgrade completed, remove the USB disk


Upgrade method two

(used to see the product software interface)

1. Format the USB disk to FAT32 format

2. Place the AutoBox_Update.img file in the root directory of the USB flash drive.

3. Plug the product into a USB charger (anything that powers up the USB dongle, never try this in a computer, USB charger only)

4. 10 seconds after the product is powered on, insert the USB flash drive and wait for 1 minute, then unplug the USB flash drive and disconnect the dongle from USB charger.

5. Plug the dongle into the car USB interface port.


Go to the Repository